Stainless steel high viscosity pump features

NYP series stainless steel high viscosity pumping high-viscosity resin, polyurethane, mystery, polyethylene, and similar high-viscosity material; particularly suitable for high viscosity consistency medium; pump head, pump housing, seal chamber portion can be interposed with insulation set. According to the actual needs of the need to select the location of insulation; jacket and pump body cast into one, the insulation effect is good, to avoid welding jacket produced a variety of problems; to be heated: through the hot steam, thermal oil and other heat medium access Jacket. ● NYP series stainless steel high viscosity pump advantages: (1) delivery of liquid smooth, pulsation, vibration, low noise. (2) has a strong self-priming performance. (3) The correct selection of parts materials, can transport a variety of corrosive media, the use of temperature up to 300 ℃. (4) the same internal and external rotor rotation, wear small, long service life. (5) pump speed and flow rate as a linear function, may be appropriate to change the speed to change the pump flow. (6) Particularly suitable for high viscosity medium transport. ● Overview of high viscosity pump NYP series stainless steel: NYP series internal gear pump is based on the needs of the petroleum, chemical, paint, oil, pharmaceuticals, dyes, food and other industries, developed a new type positive displacement pump, because the product can choose different Material and its unique structure, it is widely used in different nature, different viscosities of the media. Medium temperature: -10 ℃ -200 ℃ applicable medium viscosity: 1.0cSt-300,000cSt ● NYP series stainless steel high viscosity pump structural features: (1) works with inner teeth drive gear (outer rotor) driven by the inner rotor in the whole The closed pump body rotates in the same direction, the pump body and the front cover of the crescent so that the inlet and outlet separated. Negative pressure is formed at the suction port during rotation, the liquid is sucked in, the liquid is taken to the discharge port by the rotor, and the liquid is discharged under pressure to complete the liquid delivery. (2) Structure The series of high viscosity pump mainly consists of internal and external rotor, shaft, pump body, front cover, bracket, seal, bearing and so on. Seal mechanical seal and packing seal in two forms, for high temperature, high viscosity and corrosive media, the choice of packing seal (special requirements, optional magnetic drive, zero leakage structure). When conveying the easily-crystallized material, a thermal insulation jacket can be designed on the front cover and the pump body, and steam is used to heat and melt when working. Pump can be equipped with safety valve, when the pump or piping system overpressure, the safety valve opens, the formation of internal reflux, to ensure system safety. Pump unit consists of pump, motor and base. There are two ways of transmission bridge and direct connection.