NYP high viscosity pump works

The drive gear (outer rotor) with internal teeth drives the inner rotor to rotate in the same direction in the fully enclosed pump body, and the crescent plate of the pump body and the front cover separate the suction inlet and the discharge outlet. Negative pressure is formed at the suction port during rotation, the liquid is sucked in, the liquid is taken to the discharge port by the rotor, and the liquid is discharged under pressure to complete the liquid delivery. NYP high viscosity pump has internal and external rotor, shaft, pump body, front cover, bracket, seal, bearing and other components. Sealing a mechanical seal and packing seal in two forms, for high temperature, high viscosity and corrosive media, the choice of packing seal. When conveying the easily-crystallized material, a thermal insulation jacket can be designed on the front cover and the pump body, and steam is used to heat and melt when working. Pump can be equipped with safety valve, when the pump or piping system overpressure, the safety valve opens, the formation of internal reflux, to ensure system safety. Pump unit consists of pump, motor and base. There are two ways of transmission bridge and direct connection. From the motor end to the pump, clockwise rotation.