NYP high viscosity pump considerations

NYP High Viscosity Pump Considerations NYP High Viscosity Pump Fill the rotor pump housing with liquid to be delivered before starting operation for safe start-up. If the ambient temperature is below the freezing point, preheat the pump with heat steam beforehand and then start the gear pump. The direction of rotation of high-viscosity pump with inlet and outlet port line. If the rotor pump is operated for the first time or used for a long time after it is idle, it is best to run for about one hour at no-load or light-load conditions. If abnormal temperature rise, leakage, vibration and noise are detected in advance during running-in, the machine should be shut down for inspection. NYP high viscosity pump advantages: 1. The delivery of liquid smooth, pulsation, vibration, low noise. 2. There is a strong self-priming performance. 3. Proper selection of parts materials, can transport a variety of corrosive media, the use of temperature up to 200 ℃. 4. Internal and external rotor to the same, wear small, long service life. Pump speed and flow rate is a linear function of the appropriate changes in speed to change the pump flow. 6. Especially suitable for high viscosity medium delivery. 7. High viscosity pump is mainly internal and external rotor, shaft, pump body, pump cover, bracket, seal, bearing and other components.