How to improve the working efficiency of high pressure pump

High pressure pump is widely used in modern society, especially in some high floors, long pipeline transportation, groundwater collection and so on. High-pressure pump was used for a long time, prone to lack of pressure, low work efficiency and other issues. So, in this case is there any effective way to solve the problem of low pressure pump high efficiency? Let's discuss with Xiaobian about it. High-pressure pump 1. The transformation of high-pressure pipe may be too small before the high-pressure pipe, resulting in pressure can not be fully into the high-pressure pump, resulting in material conversion failed to achieve the desired results. We will be high-pressure pipe bold, expanding the pressure of access to the area. 2. Improve the quality of high-pressure pipe The realization of this phenomenon requires us to clean the pipe wall, the high pressure pipe becomes smoother, effectively reducing the pressure and wall friction, increasing the amount of pressure into. Flat welding flange 3. High-pressure pump nozzle improvements In the high-pressure pump nozzle outlet to reduce the curvature of the chamfer to avoid the flow should be too fast to affect the pressure jet quality, after a reasonable improvement, for the high-pressure pump work efficiency increase large helpful. 4. Shorten the length of the wall For the production of unwanted wall, we can properly subtract, the long pipeline will affect the air flow, remove the excess wall can improve the high-pressure pump efficiency. The improvement of work efficiency can bring good economic benefits. Although reasonable modification of high-pressured pumps can bring good results, improvising may sometimes bring negative effects. Therefore, we must be cautious in the transformation. Industry Internet (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: Chen Yuan (QQ / WeChat:) http://beng.liuti.cn/ (Service Hotline:)