High pressure pump to use precautions

JT-YFY-60TB high pressure pump Notes 1, the operator should be with the JT-YFY-60TB high-pressure pump cylinder to maintain a certain distance to avoid personal injury. 2, handling installation Desktop high pressure pump should be gently, so as not to collide, damage to the pressure pump parts, affecting the use. 3, JT-YFY-60TB desktop hydraulic pressure pump away from open flame, overheating. Open flames or overheating soften gaskets and seals, resulting in oil leaks. 4, JT-YFY-60TB high-pressure pump outlet 1, the pressure output port 2 are movable internal thread M20 × 1.5, should not be connected with other threads, damaged thread. 5, stop valve handle, regulator valve, handle oil (water) cup handle should not be too hard, so that the needle head deformation and damage. 6, pressure should not exceed the pressure pump calibration range, otherwise it will cause some parts of the pressure system permanent damage. 7, the user shall not be loose, replace the parts, if quality problems should contact the manufacturer, under the guidance of professional and technical personnel for maintenance. 8, JT-YFY-60TB high-pressure pump at the factory, has been pure water pressure test for pressure medium test, if not particularly necessary to recommend users to use DB10 # silicone as a pressure transmission medium, special note: If used DB10 # As a pressure transmission medium silicone oil, you can no longer use water as pressure transmission medium, or the system will likely be severely damaged