Comparison between the new two-stage hydraulic hinge and a hydraulic hinge
December 04, 2023
Baile blfm two-stage hydraulic mute hinge why two hydraulic force? Is there anything different than the hydraulically damped hinges on the market? And listen to me carefully.
First answer what is a two-section hydraulic hydraulic mute hinge.
To explain this problem, first talk about the ordinary section of force and two sections of force hinges. The article on what is a piece of force and two sections of force hinges on the web. My explanation is that the ordinary section hinge is the kind of time when the door is closed, with a hinged door hinged on the door; when the two-section hinge is closed, the door can stay in any position before 45°, and the door does not close. After 45°, it is also a slamming hinge. The ordinary two-section force hinge divides the process of closing the door into two, and the door is automatically closed after it is closed to 45°. Both hinges are non-damping and can be classified as noise hinges. When they use their furniture or cabinet door panels, they will make annoying slamming door closing sounds. A certain amount of force has been used very little in China. The market is basically a two-section force hinge. In the same way, the built-in hydraulic silent hinge on the market is also divided into a force and a two-stage force, but the two-stage hydraulic hydraulic mute hinge has just been successfully developed, and domestic users and buyers know very little. However, in Europe and the United States, two-stage hydraulic mute hinges have been used on a large scale.
That Baile blfm two-section hydraulic hydraulic muted hinged features?
The built-in hydraulic damper hinges we can see on the market are all a piece of force. Open the door and open it completely. Close the door and close the door. This is due to the structure of a hydraulically damped hinge. Is this structure unsatisfactory? The most serious problem is that the door flaps back and forth when the door is opened. A hydraulically damped hinge uses a one-sided torsion spring. The hinge using this spring is either fully closed or fully open, so it is called a force. When the door is opened, due to the influence of the weight and inertia of the door and the structure of the unilateral torsion spring, the door panel will move back and forth several times at the maximum angle to stop. The force of twitching will be transmitted directly to the wooden screw on the base. With more opening and closing times, wooden screws will slip and loosen, which will affect the normal use of furniture and cabinets. Because of the structure of a hinge, furniture and cabinets cannot be used normally. This is the biggest hidden danger of hydraulically damped hinges on the market.
The technical engineers in our factory have passed through more than one year of research and development, testing, and under the pressure of foreign monopoly of brand technology, through independent innovation, they have finally achieved a technological breakthrough this year, and successfully developed two paragraphs with global technology patents. Hydraulic mute hinges!
Baile blfm two-stage hydraulic hydraulic mute hinge adopts the structure of bilateral torsion spring and patented double bearing, which can make the door panel open 110°. When the door is closed, in the range of 110° to 45°, the door panel can freely stay in any one At an angle of 45°, the front door is slowly closed again. Due to the patented double-bearing structure, the range of 0°-110° is divided into two sections, which effectively solves the problem that a hydraulically-damped hinge causes door flaps to move back and forth when the door is opened.
In order to allow users to clearly understand the beauty of the structure of the Baile blfm two-stage hydraulic and hydraulic muted hinge, we have produced a comparative video of two sections of ordinary two-section force, a section of hydraulically-damped hinge, and two-section hydraulic BaiLi blfm mute hinge. , enter our website:
